# i3 config file (v4) # Please see http://i3wm.org/docs/userguide.html for a complete reference! #################################################### ### START OF OWN ADDITIONS SECTION ### #################################################### # NOTE: # - run `arandr` and save layout to find the correct settings to use for monitor setup # - remember to update tray_output on line ~394 # - to save workspace layout: # `i3-save-tree --workspace 1 > /media/drive2/nass/cb/gitRepos/sourcehut/lnxPub/cfg/2103mjr/.i3/ws1.json` # ------ # XRANDR + APPEND LAYOUT # ------ # ---------------------------------------- # laptop monitor only # DP-2: laptop # ---------------------------------------- exec --no-startup-id xrandr --output DP-0 --off --output DP-1 --off --output HDMI-0 --off --output DP-2 --primary --mode 3840x2160 --pos 0x0 --rotate normal --output DP-3 --off --output DP-4 --off --output DP-5 --off --output DP-6 --off workspace 1 output DP-2 #exec --no-startup-id "i3-msg 'workspace 1; append_layout /media/drive2/nass/cb/gitRepos/sourcehut/lnxPub/cfg/2103mjr/.i3/laptop_ws1.json'" #exec --no-startup-id i3-msg 'workspace 1; exec firefox' #exec --no-startup-id i3-msg 'workspace 1; exec terminal -e nnn' #exec --no-startup-id i3-msg 'workspace 1; exec terminal' # ---------------------------------------- # laptop off (0) + three external monitors (3) # DP-4: 2560x1600 vertical # HDMI-0: 4k # DP-1: 1920x1080 vertical # ---------------------------------------- #exec --no-startup-id xrandr --output DP-0 --off --output DP-1 --mode 1920x1080 --pos 5440x400 --rotate right --output HDMI-0 --primary --mode 3840x2160 --pos 1600x400 --rotate normal --output DP-2 --off --output DP-3 --off --output DP-4 --mode 2560x1600 --pos 0x0 --rotate right --output DP-5 --off --output DP-6 --off #workspace 3 output DP-4 #workspace 1 output HDMI-0 #workspace 2 output DP-1 #exec --no-startup-id "i3-msg 'workspace 1; append_layout /media/drive2/nass/cb/gitRepos/sourcehut/lnxPub/cfg/2103mjr/.i3/220319_ws1.json'" #exec --no-startup-id "i3-msg 'workspace 2; append_layout /media/drive2/nass/cb/gitRepos/sourcehut/lnxPub/cfg/2103mjr/.i3/220319_ws2.json'" #exec --no-startup-id i3-msg 'workspace 1; exec /usr/bin/firefox' #exec --no-startup-id i3-msg 'workspace 1; exec atom --no-sandbox' #exec --no-startup-id i3-msg 'workspace 1; exec SpiderOakONE' #exec --no-startup-id i3-msg 'workspace 1; exec terminal -e nnn' #exec --no-startup-id i3-msg 'workspace 1; exec terminal' #exec --no-startup-id i3-msg 'workspace 1; exec subl' #exec --no-startup-id i3-msg 'workspace 1; exec pavucontrol' #exec --no-startup-id i3-msg 'workspace 2; exec /usr/bin/pcmanfm' #exec --no-startup-id i3-msg 'workspace 2; exec /usr/bin/pcmanfm' #exec --no-startup-id i3-msg 'workspace 2; exec /usr/bin/pcmanfm' #################################################### ### END OF OWN ADDITIONS SECTION ### #################################################### # ***************************************************** # NOTE: altered lines below are marked with "UPDATED" # ***************************************************** # Set mod key (Mod1=, Mod4=) set $mod Mod4 # set default desktop layout (default is tiling) # workspace_layout tabbed # Configure border style default_border pixel 1 default_floating_border normal # Hide borders hide_edge_borders none # change borders #bindsym $mod+u border none #bindsym $mod+y border pixel 1 #bindsym $mod+n border normal # Font for window titles. Will also be used by the bar unless a different font is used in the bar {} block below. # list fonts on the system using: `fc-list` font xft:URWGothic-Book 8 # Use Mouse+$mod to drag floating windows floating_modifier $mod # start a terminal bindsym $mod+Return exec terminal # kill focused window bindsym $mod+Shift+q kill # start program launcher bindsym $mod+d exec --no-startup-id dmenu_recency # launch categorized menu #bindsym $mod+z exec --no-startup-id morc_menu ################################################################################################ ## sound-section - DO NOT EDIT if you wish to automatically upgrade Alsa -> Pulseaudio later! ## ################################################################################################ # ALSA: #exec --no-startup-id volumeicon #bindsym $mod+Ctrl+m exec terminal -e 'alsamixer' # PULSE: #exec --no-startup-id pulseaudio #exec --no-startup-id pa-applet bindsym $mod+Ctrl+m exec pavucontrol ################################################################################################ # Screen brightness controls # bindsym XF86MonBrightnessUp exec "xbacklight -inc 10; notify-send 'brightness up'" # bindsym XF86MonBrightnessDown exec "xbacklight -dec 10; notify-send 'brightness down'" # Start Applications bindsym $mod+Ctrl+b exec terminal -e 'bmenu' #bindsym $mod+F2 exec palemoon # UPDATED bindsym $mod+F3 exec pcmanfm # bindsym $mod+F3 exec ranger bindsym $mod+Shift+F3 exec pcmanfm_pkexec #bindsym $mod+F5 exec terminal -e 'mocp' # UPDATED bindsym $mod+t exec --no-startup-id pkill compton bindsym $mod+Ctrl+t exec --no-startup-id compton -b bindsym $mod+Shift+d --release exec "killall dunst; exec notify-send 'restart dunst'" #bindsym Print exec --no-startup-id i3-scrot # UPDATED #bindsym $mod+Print --release exec --no-startup-id i3-scrot -w # UPDATED #bindsym $mod+Shift+Print --release exec --no-startup-id i3-scrot -s # UPDATED #bindsym $mod+Shift+h exec xdg-open /usr/share/doc/manjaro/i3_help.pdf # UPDATED bindsym $mod+Ctrl+x --release exec --no-startup-id xkill # focus_follows_mouse no # change focus #bindsym $mod+j focus left #bindsym $mod+k focus down #bindsym $mod+l focus up #bindsym $mod+semicolon focus right # alternatively, you can use the cursor keys: bindsym $mod+Left focus left bindsym $mod+Down focus down bindsym $mod+Up focus up bindsym $mod+Right focus right # move focused window #bindsym $mod+Shift+j move left #bindsym $mod+Shift+k move down #bindsym $mod+Shift+l move up #bindsym $mod+Shift+semicolon move right # alternatively, you can use the cursor keys: bindsym $mod+Shift+Left move left bindsym $mod+Shift+Down move down bindsym $mod+Shift+Up move up bindsym $mod+Shift+Right move right # workspace back and forth (with/without active container) workspace_auto_back_and_forth yes bindsym $mod+b workspace back_and_forth bindsym $mod+Shift+b move container to workspace back_and_forth; workspace back_and_forth # split orientation bindsym $mod+h split h;exec notify-send 'tile horizontally' bindsym $mod+v split v;exec notify-send 'tile vertically' bindsym $mod+q split toggle # toggle fullscreen mode for the focused container bindsym $mod+f fullscreen toggle # change container layout (stacked, tabbed, toggle split) bindsym $mod+s layout stacking bindsym $mod+w layout tabbed bindsym $mod+e layout toggle split # toggle tiling / floating bindsym $mod+Shift+space floating toggle # change focus between tiling / floating windows bindsym $mod+space focus mode_toggle # toggle sticky bindsym $mod+Shift+s sticky toggle # focus the parent container bindsym $mod+a focus parent # move the currently focused window to the scratchpad bindsym $mod+Shift+minus move scratchpad # Show the next scratchpad window or hide the focused scratchpad window. # If there are multiple scratchpad windows, this command cycles through them. bindsym $mod+minus scratchpad show #navigate workspaces next / previous bindsym $mod+Ctrl+Right workspace next bindsym $mod+Ctrl+Left workspace prev # Workspace names # to display names or symbols instead of plain workspace numbers you can use # something like: set $ws1 1:mail # set $ws2 2: set $ws1 1 set $ws2 2 set $ws3 3 set $ws4 4 set $ws5 5 set $ws6 6 set $ws7 7 set $ws8 8 # switch to workspace bindsym $mod+1 workspace $ws1 bindsym $mod+2 workspace $ws2 bindsym $mod+3 workspace $ws3 bindsym $mod+4 workspace $ws4 bindsym $mod+5 workspace $ws5 bindsym $mod+6 workspace $ws6 bindsym $mod+7 workspace $ws7 bindsym $mod+8 workspace $ws8 # Move focused container to workspace bindsym $mod+Ctrl+1 move container to workspace $ws1 bindsym $mod+Ctrl+2 move container to workspace $ws2 bindsym $mod+Ctrl+3 move container to workspace $ws3 bindsym $mod+Ctrl+4 move container to workspace $ws4 bindsym $mod+Ctrl+5 move container to workspace $ws5 bindsym $mod+Ctrl+6 move container to workspace $ws6 bindsym $mod+Ctrl+7 move container to workspace $ws7 bindsym $mod+Ctrl+8 move container to workspace $ws8 # Move to workspace with focused container bindsym $mod+Shift+1 move container to workspace $ws1; workspace $ws1 bindsym $mod+Shift+2 move container to workspace $ws2; workspace $ws2 bindsym $mod+Shift+3 move container to workspace $ws3; workspace $ws3 bindsym $mod+Shift+4 move container to workspace $ws4; workspace $ws4 bindsym $mod+Shift+5 move container to workspace $ws5; workspace $ws5 bindsym $mod+Shift+6 move container to workspace $ws6; workspace $ws6 bindsym $mod+Shift+7 move container to workspace $ws7; workspace $ws7 bindsym $mod+Shift+8 move container to workspace $ws8; workspace $ws8 # Open applications on specific workspaces # assign [class="Thunderbird"] $ws1 # assign [class="Pale moon"] $ws2 # assign [class="Pcmanfm"] $ws3 # assign [class="Skype"] $ws5 # Open specific applications in floating mode for_window [class="calamares"] floating enable border normal for_window [class="Clipgrab"] floating enable for_window [class="fpakman"] floating enable for_window [class="Galculator"] floating enable border normal for_window [class="GParted"] floating enable border normal for_window [class="Lightdm-settings"] floating enable for_window [class="Lxappearance"] floating enable sticky enable border normal for_window [class="Manjaro-hello"] floating enable for_window [class="Manjaro Settings Manager"] floating enable border normal for_window [class="Nitrogen"] floating enable sticky enable border normal for_window [class="Oblogout"] fullscreen enable for_window [class="octopi"] floating enable for_window [class="Pamac-manager"] floating enable #for_window [class="Pavucontrol"] floating enable border normal for_window [class="qt5ct"] floating enable sticky enable border normal for_window [class="Qtconfig-qt4"] floating enable sticky enable border normal for_window [class="Simple-scan"] floating enable border normal for_window [class="(?i)System-config-printer.py"] floating enable border normal for_window [class="Skype"] floating enable border normal for_window [class="Timeset-gui"] floating enable border normal for_window [class="(?i)virtualbox"] floating enable border normal for_window [class="Xfburn"] floating enable # switch to workspace with urgent window automatically for_window [urgent=latest] focus # reload the configuration file bindsym $mod+Shift+c reload # restart i3 inplace (preserves your layout/session, can be used to upgrade i3) bindsym $mod+Shift+r restart # exit i3 (logs you out of your X session) bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'" # Set shut down, restart and locking features bindsym $mod+0 mode "$mode_system" set $mode_system (l)ock, (e)xit, switch_(u)ser, (s)uspend, (h)ibernate, (r)eboot, (Shift+s)hutdown mode "$mode_system" { bindsym l exec --no-startup-id i3exit lock, mode "default" bindsym s exec --no-startup-id i3exit suspend, mode "default" bindsym u exec --no-startup-id i3exit switch_user, mode "default" bindsym e exec --no-startup-id i3exit logout, mode "default" bindsym h exec --no-startup-id i3exit hibernate, mode "default" bindsym r exec --no-startup-id i3exit reboot, mode "default" bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default" # exit system mode: "Enter" or "Escape" bindsym Return mode "default" bindsym Escape mode "default" } # Resize window (you can also use the mouse for that) bindsym $mod+r mode "resize" mode "resize" { # These bindings trigger as soon as you enter the resize mode # Pressing left will shrink the window’s width. # Pressing right will grow the window’s width. # Pressing up will shrink the window’s height. # Pressing down will grow the window’s height. bindsym j resize shrink width 5 px or 5 ppt bindsym k resize grow height 5 px or 5 ppt bindsym l resize shrink height 5 px or 5 ppt bindsym semicolon resize grow width 5 px or 5 ppt # same bindings, but for the arrow keys # UPDATED SECTION bindsym Left resize shrink width 2 px or 2 ppt bindsym Down resize grow height 2 px or 2 ppt bindsym Up resize shrink height 2 px or 2 ppt bindsym Right resize grow width 2 px or 2 ppt # exit resize mode: Enter or Escape bindsym Return mode "default" bindsym Escape mode "default" } # Lock screen #bindsym $mod+9 exec --no-startup-id blurlock # Autostart applications exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 #exec --no-startup-id nitrogen --restore; sleep 1; compton -b exec --no-startup-id manjaro-hello exec --no-startup-id nm-applet exec --no-startup-id xfce4-power-manager exec --no-startup-id pamac-tray # exec --no-startup-id clipit # UPDATED # exec --no-startup-id blueman-applet # exec_always --no-startup-id sbxkb # exec --no-startup-id start_conky_maia # UPDATED # exec --no-startup-id start_conky_green exec --no-startup-id xautolock -time 60 -locker blurlock # UPDATED exec_always --no-startup-id ff-theme-util exec_always --no-startup-id fix_xcursor # Color palette used for the terminal ( ~/.Xresources file ) # Colors are gathered based on the documentation: # https://i3wm.org/docs/userguide.html#xresources # Change the variable name at the place you want to match the color # of your terminal like this: # [example] # If you want your bar to have the same background color as your # terminal background change the line 362 from: # background #14191D # to: # background $term_background # Same logic applied to everything else. set_from_resource $term_background background set_from_resource $term_foreground foreground set_from_resource $term_color0 color0 set_from_resource $term_color1 color1 set_from_resource $term_color2 color2 set_from_resource $term_color3 color3 set_from_resource $term_color4 color4 set_from_resource $term_color5 color5 set_from_resource $term_color6 color6 set_from_resource $term_color7 color7 set_from_resource $term_color8 color8 set_from_resource $term_color9 color9 set_from_resource $term_color10 color10 set_from_resource $term_color11 color11 set_from_resource $term_color12 color12 set_from_resource $term_color13 color13 set_from_resource $term_color14 color14 set_from_resource $term_color15 color15 # Start i3bar to display a workspace bar (plus the system information i3status if available) bar { i3bar_command i3bar status_command i3status position bottom ## please set your output first. Example: 'xrandr --output eDP1 --primary' tray_output primary # UPDATED ("primary" only works when you have multiple monitors) # tray_output DP-2 # laptop screen # tray_output DP-3 # external monitor bindsym button4 nop bindsym button5 nop # font xft:URWGothic-Book 11 strip_workspace_numbers yes colors { background #4A0237 # UPDATED statusline #FC08BB # UPDATED separator #2AFF00 # UPDATED # border backgr. text focused_workspace #2AFF00 #FC08BB #63034A # UPDATED active_workspace #FC08BB #FC08BB #63034A # UPDATED inactive_workspace #FC08BB #63034A #FC08BB # UPDATED binding_mode #FC08BB #2AFF00 #FC08BB # UPDATED urgent_workspace #FC08BB #2AFF00 #FC08BB # UPDATED } } # hide/unhide i3status bar bindsym $mod+m bar mode toggle # Theme colors # UPDATED SECTION # class border backgr. text indic. child_border client.focused #53cff9 #53cff9 #fc08bb #FDF6E3 #2AFF00 client.focused_inactive #0683ac #0683ac #b5ebfc #454948 client.unfocused #045d7b #045d7b #09bbf6 #454948 client.urgent #CB4B16 #FDF6E3 #1ABC9C #268BD2 client.placeholder #000000 #0c0c0c #ffffff #000000 client.background #7d035c ############################# ### settings for i3-gaps: ### ############################# # Set inner/outer gaps gaps inner 8 gaps outer -2 # Additionally, you can issue commands with the following syntax. This is useful to bind keys to changing the gap size. # gaps inner|outer current|all set|plus|minus # gaps inner all set 10 # gaps outer all plus 5 # Smart gaps (gaps used if only more than one container on the workspace) smart_gaps on # Smart borders (draw borders around container only if it is not the only container on this workspace) # on|no_gaps (on=always activate and no_gaps=only activate if the gap size to the edge of the screen is 0) smart_borders on # Press $mod+Shift+g to enter the gap mode. Choose o or i for modifying outer/inner gaps. Press one of + / - (in-/decrement for current workspace) or 0 (remove gaps for current workspace). If you also press Shift with these keys, the change will be global for all workspaces. set $mode_gaps Gaps: (o) outer, (i) inner set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global) set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global) bindsym $mod+Shift+g mode "$mode_gaps" mode "$mode_gaps" { bindsym o mode "$mode_gaps_outer" bindsym i mode "$mode_gaps_inner" bindsym Return mode "default" bindsym Escape mode "default" } mode "$mode_gaps_inner" { bindsym plus gaps inner current plus 5 bindsym minus gaps inner current minus 5 bindsym 0 gaps inner current set 0 bindsym Shift+plus gaps inner all plus 5 bindsym Shift+minus gaps inner all minus 5 bindsym Shift+0 gaps inner all set 0 bindsym Return mode "default" bindsym Escape mode "default" } mode "$mode_gaps_outer" { bindsym plus gaps outer current plus 5 bindsym minus gaps outer current minus 5 bindsym 0 gaps outer current set 0 bindsym Shift+plus gaps outer all plus 5 bindsym Shift+minus gaps outer all minus 5 bindsym Shift+0 gaps outer all set 0 bindsym Return mode "default" bindsym Escape mode "default" } #################################################### ### START OF OWN ADDITIONS SECTION ### #################################################### bindsym $mod+9 mode "$mode_displays" set $mode_displays (l)ock displays, (o)ff displays mode "$mode_displays" { bindsym l exec --no-startup-id blurlock, mode "default" bindsym o exec --no-startup-id xset dpms force off, mode "default" # exit system mode: "Enter" or "Escape" bindsym Return mode "default" bindsym Escape mode "default" } # start own conky exec --no-startup-id start_conky_fk # print: select region bindsym --release Print exec --no-startup-id scrot -s -f -e 'xclip $f -selection clipboard -t image/png' '/home/poq/syncDir/0_downloads/%Y%m%d%H%M%S_$wx$h.png' # shift+print: window bindsym --release Shift+Print exec --no-startup-id scrot -u -e 'xclip $f -selection clipboard -t image/png' '/home/poq/syncDir/0_downloads/%Y%m%d%H%M%S_$wx$h.png' # ctrl+print: delayed screenshot (for context menu) bindsym Ctrl+Print exec --no-startup-id scrot -d 3 -e 'xclip $f -selection clipboard -t image/png' '/home/poq/syncDir/0_downloads/%Y%m%d%H%M%S_$wx$h.png' # open applications in floating mode # "xprop | grep -i 'class'" (The first part of the WM_CLASS is the instance, the second part is the class) for_window [class="Epdfview"] floating enable border normal for_window [class="Gpicview"] floating enable border normal for_window [class="Protonvpn"] floating enable border normal for_window [class="SpeedCrunch"] floating enable border normal for_window [class="tuxedo-control-center"] floating enable border normal for_window [class="Viewnior"] floating enable border normal for_window [class="Xfce4-power-manager-settings"] floating enable border normal mode "move_container" { bindsym Up move up 20px bindsym Left move left 20px bindsym Down move down 20px bindsym Right move right 20px bindsym $mod+m mode "default" bindsym Return mode "default" bindsym Escape mode "default" } bindsym $mod+p focus floating; mode "move_container" # jump to specific windows bindsym $mod+semicolon [class="URxvt"] focus # ; - cli bindsym $mod+j [class="Signal"] focus # j - Jabber bindsym $mod+g [class="Gimp"] focus # g - Gimp bindsym $mod+i [class="firefox"] focus # i - Internet bindsym $mod+k [class="GitKraken"] focus # k - (git)Kraken bindsym $mod+c [class="VSCodium"] focus # c - Coding ide bindsym $mod+n [class="Subl"] focus # n - Notepad (sublime) bindsym $mod+o [class="obsidian"] focus # o - Obsidian bindsym $mod+y [class="REAPER"] focus # y - whY reaper bindsym XF86AudioPlay exec --no-startup-id playerctl play bindsym XF86AudioStop exec --no-startup-id playerctl pause bindsym XF86AudioNext exec --no-startup-id playerctl next bindsym XF86AudioPrev exec --no-startup-id playerctl previous # use command `xsetwacom list devices` to find the id for type 'stylus' and map that to main monitor 'HEAD-0': #exec --no-startup-id xsetwacom set "8" MapToOutput HEAD-0 #exec --no-startup-id cryptomator exec --no-startup-id dropbox exec --no-startup-id nitrogen --restore; sleep 1; compton -b exec --no-startup-id pasystray exec --no-startup-id pcloud # > /dev/null exec --no-startup-id protonvpn-app #exec --no-startup-id redshift-gtk exec --no-startup-id SpiderOakONE exec --no-startup-id synology-drive exec --no-startup-id xbindkeys exec --no-startup-id tuxedo-control-center exec --no-startup-id nextcloud exec_always --no-startup-id setxkbmap -model pc105 -layout us,no -option grp:caps_toggle,grp_led:scroll exec_always --no-startup-id xset dpms 0 0 1800; # screen off after 30 min (1800 sec) # Impossible to execute xset dpms from the config file | https://github.com/i3/i3/issues/3877 exec --no-startup-id i3-msg reload exec --no-startup-id i3-msg restart exec --no-startup-id i3-msg reload #################################################### ### END OF OWN ADDITIONS SECTION ### ####################################################